Enterasys N Standalone (NSA) Series Configuration Manual page 667

Numb
Table 8-5 show cos port-type Output Details
Output
Index
Port type
description
Number of slices /
Number of queues
Number of
limiters
Supported rate
types
Eligible ports
Unselected ports
Policy Classification Configuration Command Set
What It Displays...
Port type index. Port type 0 designates the Matrix Platinum
Series 7G4270-12 module, and port type 1 designates all
other modules.
Resource-specific text description of the port type. Default
names are:
•
DFE-P 16Q for port type 0 TXQ (Applies to
DFE-Platinum chassis-based systems only)
•
DFE-P or DFE-G 4Q for port type 1 TXQ
•
DFE-P 32 IRL for port type 0 IRL (Applies to
DFE-Platinum chassis-based systems only)
•
DFE-P or DFE-G 8 IRL for port type 1 IRL
The total number of slices of transmit resources that can be
divided among port queues, and the total number of queues
available. Default port type 0 (the Matrix Platinum Series
7G4270-12 module) allows 64 slices for 16 queues. Default
port type 1 (all other modules) allows 32 slices for 4
queues.
Maximum number of inbound rate limiters configurable for
each port type. When configured for IRL, default port type
0 (the Matrix Platinum Series 7G4270-12 module) allows
for 32, and default port type 1 (all other modules) allows for
8.
Unit of measure supported by the port type.
Which device ports meet this port type criteria.
Which ports have not been assigned user-defined port
configuration settings,
Matrix NSA Series Configuration Guide
Configuring Policy Class of Service (CoS)
8-51