Enterasys N Standalone (NSA) Series Configuration Manual page 1014

IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
This example shows how to display detailed information about active server load balancing
connections:
Matrix>Router1#show ip slb conns detail
Connection Flow ID : 3
Real Server IP : 172.17.1.2
Client IP : 169.225.1.50
Real Server Port : 1003
Client Port : 1113
Protocol : TCP
Created Time stamp : 2004/3/24 14:34:17
Connection State : outgoing server reply state
Connection Flow ID : 2
Real Server IP : 172.17.1.2
Client IP : 169.225.1.50
Real Server Port : 21
Client Port : 1110
Protocol : TCP
Created Time stamp : 2004/3/24 14:34:07
Connection State : outgoing server reply state
Table 12-11
Table 12-11 show ip slb conns Output Details
Output
Connection Flow
ID
Real Server IP
Client IP
Real Server Port
Client Port
Protocol
Created Time
stamp
Connection State
12-102 Matrix NSA Series Configuration Guide
provides an explanation of the detailed command output.
What It Displays...
Connection flow identifier.
Address of the real server. Assigned using the real
command as described in
Client IP address for this connection.
Real server's UDP or TCP port assignment.
Client's UDP or TCP port number assignment.
Whether the connection protocol is TCP or UDP.
Time and date this connection was created.
State of the connection.
Section 12.2.8.4.