Set Spantree Protomigration - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.2.7

set spantree protomigration

Use this command to reset the protocol state migration machine for one or more Spanning Tree
ports. When operating in RSTP mode, this forces a port to transmit MSTP BPDUs.
set spantree protomigration port-string true
Syntax Description
port-string
true
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the protocol state migration machine on fe.1.12:
Matrix(rw)->
Specifies the port(s) for which protocol migration mode
will be enabled. For a detailed description of possible
port-string values, refer to
Enables protocol migration mode.
set spantree protomigration fe.1.12 true
Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
Section 4.1.1.
Matrix NSA Series Configuration Guide 6-99