Enterasys N Standalone (NSA) Series Configuration Manual page 769

11.2.2.1 history
Use this command to display the contents of the command history buffer. The command history
buffer includes all the switch commands entered up to a maximum of 50, as specified in the set
history command (Section
history
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the contents of the command history buffer. It shows there are
five commands in the buffer:
Matrix(rw)->history
1 hist
2 show gvrp
3 show vlan
4 show igmp
5 show ip address
11.2.2.3).
Logging And Network Management Command Set
Monitoring Network Events and Status
Matrix NSA Series Configuration Guide 11-27