Show Igmp Groups - Enterasys N Standalone (NSA) Series Configuration Manual

IGMP Configuration Command Set
Configuring IGMP
10.4.2.9

show igmp groups

Use this command to display information about IGMP groups known to one or more VLANs.
show igmp groups [group <group>] [vlan-list <vlan-list>] [sip <sip>]
[-verbose]
Syntax Description
group
vlan-list
sip
-verbose
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display IGMP group information for VLAN 105. In this example, the
device knows to forward all multicast traffic for IP group address 224.0.0.2 (VLAN 105) to Fast
Ethernet port 2 in port group 2, and 1-Gigabit Ethernet port 14 in port group 3:
Matrix(rw)->show igmp groups 105
-----------------------------------------------------------
Vlan Id = 105 Multicast Group Address = 224.0.0.2
IGMP Port List = fe.2.2 ge.3.14
10-18 Matrix NSA Series Configuration Guide
Group IP address (Entering no IP address shows all groups)
Specifies the VLAN(s) for which to display IGMP group
information.
Source IP address (Entering no sip shows all sips)
Show verbose display
Type = IGMP