Enterasys N Standalone (NSA) Series Configuration Manual page 621

Table 8-1 provides an explanation of the command output.
Table 8-1 show policy profile Output Details
Output
Profile Index
Profile Name
Row Status
Port VID Status
Port VID Override The PVID to assign to packets, if PVID override is enabled.
CoS Status
CoS
Tagged Egress
VLAN List
Forbidden VLAN
List
Untagged VLAN
List
Replace TCI
status
Admin Profile
Usage
Oper Profile
Usage
Dynamic Profile
Usage
Policy Classification Configuration Command Set
What It Displays...
Number of the prolicy profile.
User-supplied name assigned to this policy profile.
Whether or not the policy profile is enabled (active) or
disabled.
Whether or not PVID override is enabled or disabled for
this policy profile. If all the classification rules associated
with this profile are missed, then this parameter, if
specified, determines default behavior.
Whether or not Class of Service override is enabled or
disabled for this profile. If all the classification rules
associated with this profile are missed, then this parameter,
if specified, determines default behavior.
The CoS priority value to assign to packets, if CoS
override is enabled.
VLAN(s) that ports to which the policy profile is assigned
can use for tagged egress.
VLAN(s) forbidden to ports to which the policy profile is
assigned.
VLAN(s) that ports to which the policy profile is assigned
can use for untagged egress.
Whether or not the TCI overwrite function is enabled or
disabled for this profile.
Ports administratively assigned to use this policy profile.
Ports currently assigned to use this policy profile.
Port dynamically assigned to use this policy profile.
Matrix NSA Series Configuration Guide
Configuring Policy Profiles
8-5