Clear Policy Rule - Enterasys N Standalone (NSA) Series Configuration Manual

8.3.2.5

clear policy rule

Use this command to delete one or all policy classification rule entries.
clear policy rule admin-profile | profile-index all-pid-entries | ether ipdest |
ipfrag | ipproto | ipsource| iptos | llcDsapSsap | macdest | macsource | port
|tcpdestport| tcpsourceport| udpdestport| udpsourceport] [all-traffic-entries |
data][mask mask] [port-string port-string]}
Syntax Description
admin-profile |
profile-index
all-pid-entries
ether
ipdest
ipfrag
ipproto
ipsource
iptos
llcDsapSsap
macdest
macsource
port
tcpdestport
tcpsourceport
udpdestport
udpsourceport
Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
Deletes an administrative profile rule, or deletes rule(s)
associated with a specific profile number. Valid
profile-index values are 1 - 1023.
Deletes all rules associated with the specified policy
profile index ID.
Deletes associated Ethernet II classification rule.
Deletes associated IP destination classification rule.
Deletes associated IP fragmentation classification rule.
Deletes associated IP protocol classification rule.
Deletes associated IP source classification rule.
Deletes associated IP Type of Service classification rule.
Deletes associated DSAP/SSAP classification rule.
Deletes associated MAC destination address classification
rule.
Deletes associated MAC source address classification
rule.
Deletes associated port-string classification rule.
Deletes associated TCP destination port classification rule
.
Deletes associated TCP source port classification rule .
Deletes associated UDP destination port classification
rule .
Deletes associated UDP source port classification rule .
Matrix NSA Series Configuration Guide 8-35