Show Lldp Port Local-Info - Enterasys N Standalone (NSA) Series Configuration Manual

3.2.4.6

show lldp port local-info

Use this command to display the local system information stored for one or more ports. You can use
this information to detect misconfigurations or incompatibilities between the local port and the
attached endpoint device (remote port).
show lldp port local-info [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, local system information will be displayed for all
ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the local system information stored for port fe.4.1.
describes the output fields of this command.
Matrix(rw)->show lldp port local-info fe.4.1
Local Port : fe.4.1
--------------------
Port Desc : ... 100BASE-TX RJ21 Fast Ethernet Frontpanel Port
Mgmt Addr : 10.21.64.100
Chassis ID : 00-E0-63-93-74-A5
Sys Name : LLDP PoE test Chassis
Sys Desc : Enterasys Networks, Inc. Matrix E7 Gold Rev 05.41
Sys Cap Supported/Enabled
Auto-Neg Supported/Enabled
Auto-Neg Advertised
(Optional) Displays local system information for one or a
range of ports.
Local Port Id: fe.4.1
: bridge,router/bridge
: yes/yes
: 10BASE-T, 10BASE-TFD,
100BASE-TX, 100BASE-TXFD,
1000BASE-TFD,
Bpause
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
Matrix NSA Series Configuration Guide
Table 3-4
3-33