Enterasys N Standalone (NSA) Series Configuration Manual page 1021

12.2.8.27 clear router limits
Use this command to reset chassis-based LSNAT limits to default values.
clear router limits [lsnat-bindings] | [lsnat-cache] | [lsnat-configs]
NOTE: This command must be executed from the switch CLI.
Syntax Description
lsnat-bindings
lsnat-cache
lsnat-configs
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If no options are specified, all LSNAT limits will be reset.
Example
This example shows how to reset all chassis-based LSNAT limits:
Matrix(rw)->clear router limits
Configuring Load Sharing Network Address Translation (LSNAT)
(Optional) Resets the LSNAT maximum bindings limit to
the default value of 5000.
(Optional) Resets the LSNAT cache size limit to the default
value of 2000.
(Optional) Resets the LSNAT configuration limit to the
default value of 50.
Matrix NSA Series Configuration Guide
IP Configuration Command Set
12-109