Clear Snmp Targetaddr - Enterasys N Standalone (NSA) Series Configuration Manual

5.3.6.3

clear snmp targetaddr

Use this command to delete an SNMP target address entry.
clear snmp targetaddr targetAddr
Syntax Description
targetAddr
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear SNMP target address entry "tr":
Matrix(rw)->clear snmp targetaddr tr
Specifies the target address entry to delete.
Matrix NSA Series Configuration Guide
SNMP Configuration Command Set
Configuring SNMP Target Addresses
5-51