Configuring Snmp Notification Parameters - Enterasys N Standalone (NSA) Series Configuration Manual

SNMP Configuration Command Set

Configuring SNMP Notification Parameters

5.3.7 Configuring SNMP Notification Parameters
Purpose
To configure SNMP notification parameters and optional filters. Notifications are entities which
handle the generation of SNMP v1 and v2 "traps" or SNMP v3 "informs" messages to select
management targets. Optional notification filters identify which targets should not receive
notifications. For a sample SNMP trap configuration showing how SNMP notification parameters
are associated with security and authorization criteria (target parameters) and mapped to a
management target address, refer to
Commands
The commands used to configure SNMP notification parameters and filters are listed below and
described in the associated section as shown.
•
show snmp notify
•
set snmp notify
•
clear snmp notify
•
show snmp notifyfilter
•
set snmp notifyfilter
•
clear snmp notifyfilter
•
show snmp notifyprofile
•
set snmp notifyprofile
•
clear snmp notifyprofile
5-52 Matrix NSA Series Configuration Guide
Section
(Section 5.3.7.1)
(Section 5.3.7.2)
(Section 5.3.7.3)
(Section 5.3.7.4)
(Section 5.3.7.5)
(Section 5.3.7.6)
(Section 5.3.7.7)
(Section 5.3.7.8)
(Section 5.3.7.9)
5.3.8.