4.3.1.6
show console flowcontrol
Use this command to display the type of flow control setting for one or more console ports.
show console flowcontrol [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, the flow control setting for all console ports will be
displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the flow control setting for console port com.1.1:
Matrix(rw)->show console flowcontrol com.1.1
Port
------------
com.1.1
(Optional) Displays the flow control setting for specific console
port(s).
Flow
--------
ctsrts
Port Configuration Command Set
Setting Console Port Properties
Matrix NSA Series Configuration Guide
4-11