Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6.2.2.4
show spantree portadmin
Use this command to display the status of the Spanning Tree algorithm on one or more ports.
show spantree portadmin [port port-string]
Syntax Description
port port-string
Command Defaults
If port-string is not specified, status will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display port admin status for fe.1.7:
Matrix(rw)->
Port fe.1.7 has portadmin set to enable
6-96 Matrix NSA Series Configuration Guide
(Optional) Displays status for specific port(s). For a
detailed description of possible port-string values, refer
to
Section
4.1.1.
show spantree portadmin port fe.1.7