Show Spantree Adminpathcost - Enterasys N Standalone (NSA) Series Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6.2.2.16

show spantree adminpathcost

Use this command to display the admin path cost for a port on one or more Spanning Trees.
show spantree adminpathcost [port port-string] [sid sid]
Syntax Description
port port-string
sid sid
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the admin path cost for fe.3.4 on SID 1:
Matrix(rw)->
Port fe.3.4 has a Port Admin Path Cost of 0 on SID 1
6-108 Matrix NSA Series Configuration Guide
If port-string is not specified, admin path cost for all Spanning Tree ports will
be displayed.
If sid is not specified, admin path cost for Spanning Tree 0 will be displayed.
show spantree adminpathcost port fe.3.4 sid
1
(Optional) Displays the admin path cost value for specific
port(s). For a detailed description of possible port-string
values, refer to Section 4.1.1
(Optional) Displays the admin path cost for a specific
Spanning Tree identifier. Valid values are 0 - 4094. If not
specified, SID 0 will be assumed.
.