Show Snmp Engineid - Enterasys N Standalone (NSA) Series Configuration Manual

SNMP Configuration Command Set
Reviewing SNMP Statistics
5.3.1.1

show snmp engineid

Use this command to display the SNMP local engine ID. This is the SNMP v3 engine's
administratively unique identifier.
show snmp engineid
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SNMP engine properties:
Matrix(rw)->show snmp engineid
EngineId: 80:00:15:f8:03:00:e0:63:9d:b5:87
Engine Boots
Engine Time
Max Msg Size
Table 5-2
Table 5-2 show snmp engineid Output Details
Output
EngineId
Engine Boots
Engine Time
Max Msg Size
5-6 Matrix NSA Series Configuration Guide
= 12
= 162181
= 2048
shows a detailed explanation of the command output.
What It Displays...
String identifying the SNMP agent on the device.
Number of times the SNMP engine has been
started or reinitialized.
Time in seconds since last reboot.
Maximum accepted length, in bytes, of SNMP
frame.