Enterasys N Standalone (NSA) Series Configuration Manual page 889

Table 11-16 show nodealias config Output Details
Output
Port Number
Max Entries
Used Entries
Status
Logging And Network Management Command Set
What It Displays...
Port designation.
Maximum number of alias entries configured for this port.
Set using the set nodealias maxentries command
(Section 11.2.7.6).
Number of alias entries (out of the maximum amount
configured) already used by this port.
Whether or not a node alias agent is enabled (default) or
disabled on this port.
Matrix NSA Series Configuration Guide
Configuring Node Aliases
11-147