Set Linkflap - Enterasys N Standalone (NSA) Series Configuration Manual

Port Configuration Command Set
Configuring Link Traps and Link Flap Detection
4.3.8.5

set linkflap

Use this command to enable or disable link flap monitoring on one or more ports.
set linkflap portstate {disable | enable} [port-string]
Syntax Description
disable | enable
port-string
Command Defaults
If port-string is not specified, all ports will be disabled or enabled.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the link trap monitoring on all ports:
Matrix(rw)->set linkflap portstate enable
4-74 Matrix NSA Series Configuration Guide
Disables or enables the link flap detection function.
(Optional) Specifies the port(s) on which to disable or
enable monitoring. For a detailed description of possible
port-string values, refer to Section 4.1.1.