Set Spantree Adminedge - Enterasys N Standalone (NSA) Series Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6.2.2.20

set spantree adminedge

Use this command to set the edge port administrative status on a Spanning Tree port.
set spantree adminedge port-string {true | false}
Syntax Description
port-string
true | false
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set fe.1.11 as an edge port:
Matrix(rw)->set spantree adminedge fe.1.11 true
6-112 Matrix NSA Series Configuration Guide
Specifies the edge port. For a detailed description of
possible port-string values, refer to
Enables (true) or disables (false) the specified port as a
Spanning Tree edge port.
Section 4.1.1.