Enterasys N Standalone (NSA) Series Configuration Manual page 1037

12.2.9.12 bootfile
Use this command to specify the default boot image for a DHCP client.
bootfile filename
Syntax Description
filename
Command Syntax of the "no" Form
The "no" form of this command deletes the boot image association:
no bootfile
Command Type
Router command.
Command Mode
Any DHCP configuration
Command Defaults
None.
Example
This example shows how to specify "dhcpboot" as the boot image file in the "localpool" address
pool:
Matrix>Router1(config)#ip dhcp pool localpool
Matrix>Router1(config-dhcp-pool)#bootfile dhcpboot
Configuring Dynamic Host Configuration Protocol (DHCP)
Specifies the boot image file name.
mode.
Matrix NSA Series Configuration Guide
IP Configuration Command Set
12-125