Enterasys N Standalone (NSA) Series Configuration Manual page 855

Examples
This example shows how to display the MAC address timeout period:
Matrix(rw)->
Aging time: 300 seconds
This example shows how to display MAC address information for Fast Ethernet port 3 in port group
1:
Matrix(rw)->show mac port-string fe.1.3
MAC Address
----------------- ---- ------------- ------- -------
00-01-F4-32-88-C5 0
00-00-1D-12-11-88 3
Table 11-13
Table 11-13 show mac Output Details
Output
MAC Address
FID
Port
Type
Status
show mac agetime
FID Port
fe.1.3
fe.1.3
provides an explanation of the command output.
What It Displays...
MAC addresses mapped to the port(s) shown.
Filter database identifier.
Port designation.
Address type. Valid types are:
•
other - entry is other than below
•
invalid - entry is no longer valid, but has not been yet
flushed-out
•
learned - entry has been learned and is currently used
•
self - entry represents one of the device's address
•
mgmt - entry represents a dot1qStaticUnicastAddress
(manually entered MAC address)
•
mcast - entry represents a dot1qStaticMulticastAddress
Address status. Valid types are:
•
other - entry is other than below
•
invalid - entry shall be removed
•
perm - entry is currently in use and shall remain so
AFTER the next reset (permanent)
Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
Type
self
mgmt
Matrix NSA Series Configuration Guide
Status
perm
11-113