Logging And Network Management Command Set
Configuring RMON
11.2.4.23 show rmon matrix
Use this command to display RMON matrix properties and statistics. The RMON matrix stores
statistics for conversations between sets of two addresses.
show rmon matrix [port-string] [source | dest]
Syntax Description
port-string
source | dest
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display RMON matrix properties and statistics. A control entry displays
first, followed by actual entries corresponding to the control entry:
Matrix(rw)->show rmon matrix
------------------
Matrix Index
Interface
Table size
Last deletion
Status
Owner
Source
Packets
Errors
11-80 Matrix NSA Series Configuration Guide
(Optional) Displays RMON properties and statistics for a
specific port(s).
(Optional) Sorts the display by source or destination
address.
If port-string is not specified, information about all ports will be displayed.
If not specified, information about source and destination addresses will be
displayed.
1
32009
100
116647
1
monitor
00-e0-63-9d-c1-c8
= 2
= ---
Destination 00-a0-c9-03-cd-7c
Octets
= 286