Clear Spantree Legacypathcost - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.1.44

clear spantree legacypathcost

Use this command to set the Spanning Tree default value for legacy path cost to 802.1t values.
clear spantree legacypathcost
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the default path cost values to 802.1t:
Matrix(rw)->clear spantree legacypathcost
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix NSA Series Configuration Guide 6-57