Show Spantree Vlanlist - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.1.17

show spantree vlanlist

Use this command to display the VLAN ID(s) assigned to one or more Spanning Trees.
show spantree vlanlist [vlan-list]
Syntax Description
vlan-list
Command Defaults
If not specified, SID assignment will be displayed only for VLANs assigned to any
SID other than SID 0.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display assignments for all VLANs assigned to any SID other than
SID 0:
Matrix(rw)->
Vlan 104 is mapped to Sid 104
Vlan 105 is mapped to Sid 105
Vlan 106 is mapped to Sid 106
Vlan 107 is mapped to Sid 107
(Optional) Displays information for specific VLAN(s).
show spantree vlanlist
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix NSA Series Configuration Guide 6-29