Clear Lacp Flowregeneration - Enterasys N Standalone (NSA) Series Configuration Manual

4.5.4.17

clear lacp flowRegeneration

Use this command to reset LACP flow regeneration to its default state (disabled).
clear lacp flowRegeneration
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset LACP flow regeneration to disabled:
Matrix(rw)->clear lacp flowRegeneration
Configuring Link Aggregation
Matrix NSA Series Configuration Guide
Configuring LACP
4-123