Enterasys N Standalone (NSA) Series Configuration Manual page 652

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
all-traffic-entries |
data
mask mask
port-string
port-string
Command Defaults
When applicable, data, mask, and port-string must be specified for individual rules
to be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete all classification rule entries associated with policy profile 1
from all ports:
Matrix(rw)->clear policy rule 1 all-pid-entries
8-36 Matrix NSA Series Configuration Guide
(Optional) Deletes all entries associated with this traffic
rule or a specific data value entry. Refer to
valid values for each classification type.
(Optional) Deletes associated data mask. Refer to
Table 8-3 for valid values for each classification type and
data value.
(Optional) Deletes specified rule entries for specific
ingress port(s).
Table 8-3 for