Set Igmp Enable - Enterasys N Standalone (NSA) Series Configuration Manual

10.4.1.2

set igmp enable

Use this command to enable IGMP on one or more VLANs.
set igmp enable vlan-list
Syntax Description
vlan-list
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable IGMP on VLAN 104:
Matrix(rw)->set igmp enable 104
Specifies the VLAN(s) on which to enable IGMP.
Matrix NSA Series Configuration Guide
IGMP Configuration Command Set
Enabling / Disabling IGMP
10-5