Show Summertime - Enterasys N Standalone (NSA) Series Configuration Manual

2.2.3.14

show summertime

Use this command to display daylight savings time settings.
show summertime
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display daylight savings time settings:
Matrix(rw)->show summertime
Summertime is disabled and set to ''
Start : SUN MAR 11 02:00:00 2007
End : SUN NOV 04 02:00:00 2007
Offset: 60 minutes (1 hours 0 minutes)
Recurring: yes, starting at 2:00 of the second Sunday of March and ending at
2:00 of the first Sunday of November
General Configuration Command Set
Setting Basic Device Properties
Matrix NSA Series Configuration Guide 2-61