Set Port Discard - Enterasys N Standalone (NSA) Series Configuration Manual

7.3.3.10

set port discard

Use this command to set the frame discard mode on one or more ports.
set port discard port-string {tagged | untagged | none | both}
Syntax Description
port-string
tagged | untagged
| none | both
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set Fast Ethernet port 7 in port group 2 to discard both tagged and
untagged frames:
Matrix(rw)->set port discard fe.2.7 both
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Specifies the port(s) for which to set frame discard mode.
For a detailed description of possible port-string values,
refer to Section 4.1.1.
Sets the port(s) to discard tagged or untagged frames, no
frames, or both types of frames.
Matrix NSA Series Configuration Guide
VLAN Configuration Command Set
7-23