Enterasys N Standalone (NSA) Series Configuration Manual page 66

General Configuration Command Set
Managing the Management Authentication Notification MIB
2.2.2.3 clear mgmt-auth-notify
Use this command to set the current setting for the Management Authentication Notification access
types to the default setting of enabled.
clear mgmt-auth-notify
NOTE: Ensure that SNMP is correctly configured on the DFE in order to send these
notifications. Refer to
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
2-40 Matrix NSA Series Configuration Guide
Chapter 5
for SNMP configuration information.