Set Console Baud - Enterasys N Standalone (NSA) Series Configuration Manual

4.3.1.4

set console baud

Use this command to set the baud rate for one or more console ports.
set console baud rate [port-string]
Syntax Description
rate
port-string
Command Defaults
If port-string is not specified, baud rate will be set for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the baud rate to 19200 on console port com.1.1:
Matrix(rw)->set console baud 19200 com.1.1
Sets the console baud rate. Valid values are: 300, 600, 1200,
2400, 4800, 5760, 9600, 14400, 19200, 38400, and 115200.
(Optional) Sets baud rate for specific port(s).
Port Configuration Command Set
Setting Console Port Properties
Matrix NSA Series Configuration Guide 4-9