Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.12
set spantree msti
Use this command to create or delete a Multiple Spanning Tree instance.
set spantree msti sid sid {create | delete}
Syntax Description
sid sid
create | delete
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create MST instance 2:
Matrix(rw)->set spantree msti sid 2 create
6-24 Matrix NSA Series Configuration Guide
Sets the Multiple Spanning Tree ID. Valid values are 1 -
4094.
NOTE:
Matrix Series devices will support up to
MST instances.
Creates or deletes an MST instance.