6.2.2.1
show spantree portenable
Use this command to display the port status on one or more Spanning Tree ports.
show spantree portenable [port port-string]
Syntax Description
port port-string
Command Defaults
If port-string is not specified, status will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display status for port fe.1.12:
Matrix(rw)->
Port fe.1.12
(Optional) Displays status for specific port(s). For a
detailed description of possible port-string values, refer
to
Section
4.1.1.
show spantree portenable port fe.1.12
has a Port Status of Enabled
Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
Matrix NSA Series Configuration Guide
6-93