Port Configuration Command Set
Configuring Broadcast Suppression
4.3.9.3
clear port broadcast
Use this command to reset the broadcast threshold and/or clear the peak rate and peak time values
on one or switch more ports.
clear port broadcast port-string [threshold] [peak]
Syntax Description
port-string
threshold
peak
Command Defaults
If not specified, both threshold and peak settings will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all broadcast suppression settings on Fast Ethernet ports 1 through
5 in port group 1:
Matrix(rw)->clear port broadcast fe.1.1-5
4-86 Matrix NSA Series Configuration Guide
Specifies the port(s) on which broadcast settings will be
cleared. For a detailed description of possible port-string
values, refer to
Section
(Optional) Clears the broadcast threshold setting.
(Optional) Clears the broadcast peak rate and peak rate
time values.
4.1.1.