Show Lacp Flowregeneration - Enterasys N Standalone (NSA) Series Configuration Manual

4.5.4.15

show lacp flowRegeneration

Use this command to display the LACP flow regeneration state.
show lacp flowRegeneration
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current LACP flow regeneration state
Matrix(rw)->show lacp flowRegeneration
disable
Configuring Link Aggregation
Matrix NSA Series Configuration Guide
Configuring LACP
:
4-121