Show Newaddrtraps - Enterasys N Standalone (NSA) Series Configuration Manual

11.2.5.14 show newaddrtraps

Use this command to display the status of MAC address traps on one or more ports.
show newaddrtrap [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, MAC address traps for all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display the status of MAC address traps on ge.1.1 through 3:
Matrix(rw)->
New Address Traps Globally disabled
Port
--------- ------------
ge.1.1
ge.1.2
ge.1.3
(Optional) Displays MAC address traps for specific port(s).
For a detailed description of possible port-string values,
refer to Section
show newaddrtrap
Enable State
disabled
disabled
disabled
Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
4.1.1.
Matrix NSA Series Configuration Guide 11-117