Show Spantree Spanguard - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.1.54

show spantree spanguard

Use this command to display the status of the Spanning Tree span guard function.
show spantree spanguard
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the span guard function status:
Matrix(rw)->
spanguard is currently disabled.
show spantree spanguard
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix NSA Series Configuration Guide 6-67