Table of Contents
Advertisement
Port Configuration Command Set
Reviewing Port Status
Table 4-1 show port status Output Details
Output
Port
Alias (truncated)
Oper Status
Admin Status
Speed
Duplex
Type
4-26 Matrix NSA Series Configuration Guide
What It Displays...
Port designation. For a detailed description of possible
port-string values, refer to
Alias configured for the port. For details on using the set
port alias command, refer to
Operating status (up or down).
Whether the specified port is enabled (up) or disabled
(down). For details on using the set port disable command
to change the default port status of enabled, refer to
Section
4.3.3.1. For details on using the set port enable
command to re-enable ports, refer to
Operational speed in Mbps or Kbps of the specified port.
For details on using the set port speed command to change
defaults, refer to
Section
Duplex mode (half or full) of the specified port. For details
on using the set port duplex command to change defaults,
refer to
Section
4.3.6.
Physical port and interface type.
Section
4.1.1.
Section
4.3.3.3.
Section
4.3.4.2.
4.3.3.2.
Advertisement
Chapters
Table of Contents
