Enterasys N Standalone (NSA) Series Configuration Manual page 172

Preparing the Device for Router Mode
Enabling Router Configuration Modes
Table 2-11 Router CLI Configuration Modes (Continued)
Use this mode...
Server Load
Balancing (SLB)
Real Server
Configuration
Mode
Server Load
Balancing (SLB)
Virtual Server
Configuration
Mode
IP Local Pool
Configuration
Mode
DHCP Pool
Configuration
Mode
DHCP Class
Configuration
Mode
DHCP Host
Configuration
Mode
NOTE: To jump to a lower configuration mode, type exit at the command prompt. To
revert back to switch CLI, type exit from Privileged EXEC router mode.
2-146 Matrix NSA Series Configuration Guide
To...
Configure an
LSNAT real server.
Configure an
LSNAT virtual
server.
Configure a local
address pool as a
DHCP subnet
Configure a DHCP
server address pool.
Configure a DHCP
client class.
Configure DHCP
host parameters.
Access method...
Type real and the real
server IP address
from SLB Server
Farm Configuration
Mode.
Type ip slb vserver
and the vserver-name
from Global
Configuration Mode.
Type ip local pool
and the local pool
name from Global
Configuration Mode.
Type ip dhcp pool
and the address pool
name from Global
Configuration Mode.
Type client-class and
the client class name
from DHCP Pool or
Host Configuration
Mode.
Type
client-identifier and
the identifier, or
hardware-address
and an address from
any DHCP
configuration mode.
Resulting Prompt...
Matrix>Router1
(config-slb-real)#
Matrix>Router1
(config-slb-vserver)#
Matrix>Router1
(ip-local-pool)#
Matrix>Router1
(config-dhcp-pool)#
Matrix>Router1
(config-dhcp-class)#
Matrix>Router1
(config-dhcp-host)#