Show Port Discard - Enterasys N Standalone (NSA) Series Configuration Manual

VLAN Configuration Command Set
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
7.3.3.9

show port discard

Use this command to display the frame discard mode for one or more ports. Ports can be set to
discard frames based on whether or not they contain a VLAN tag. They can also be set to discard
both frame types or none of the frames received.
show port discard [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, frame discarded mode will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the frame discard mode for Fast Ethernet port 7 in port group
2. In this case, the port has been set to discard all tagged frames:
Matrix(rw)->show port discard fe.2.7
Port
------------
fe.2.7
7-22 Matrix NSA Series Configuration Guide
(Optional) Displays the frame discard mode for specific
port(s). For a detailed description of possible port-string
values, refer to Section
Discard Mode
-------------
tagged
4.1.1.