Enterasys N Standalone (NSA) Series Configuration Manual page 640

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
data
mask mask
port-string
port-string
rule-status active
| not-in-service |
not-ready
storage-type
non-volatile |
volatile
vlan vlan
drop | forward
dynamic-pid
dynamic-pid
cos cos
admin-pid
admin-pid
-verbose
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
8-24 Matrix NSA Series Configuration Guide
(Not required for ipfrag classification.) Displays rules for a
predefined classifier. This value is dependent on the
classification type entered. Refer to
values for each classification type.
(Optional) Displays rules for a specific data mask. Refer to
Table 8-3
data value.
(Optional) Displays rules related to a specific ingress port.
(Optional) Displays rules related to a specific rules status.
(Optional) Displays rules configured for either non-volatile
or volatile storage.
(Optional) Displays rules for a specific VLAN ID.
Displays rules based on whether matching packets specified
by the vlan parameter will be dropped or forwarded.
Displays rules associated with a specific dynamic policy
profile index ID.
(Optional) Displays rules for a Class-of-Service value.
Displays rules associated with a specific administrative
policy profile index ID.
(Optional) Displays detailed information.
If port-string, rule status, storage type, Syslog state, trap, and usage-list are not
specified, all rules related to other specifications will be displayed.
If verbose is not specified, summary information will be displayed.
for valid values for each classification type and
Table 8-3 for valid