VLAN Configuration Command Set
Configuring the VLAN Egress List
7.3.4.4
show vlan dynamic egress
Use this command to display which VLANs are currently enabled for VLAN dynamic egress.
show vlan dynamicegress [vlan-list]
Syntax Description
vlan-list
Command Defaults
If vlan-list is not specified, status for all VLANs where dynamic egress is enabled
will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display which VLANs are enabled for dynamic egress:
Matrix(rw)->show vlan dynamicegress
VLAN 1 is enabled
VLAN 101 is enabled
VLAN 102 is enabled
VLAN 105 is enabled
7-30 Matrix NSA Series Configuration Guide
(Optional) Displays dynamic egress status for specific
VLAN(s).