Show Forcelinkdown - Enterasys N Standalone (NSA) Series Configuration Manual

Port Configuration Command Set
Disabling / Enabling and Naming Ports
4.3.3.5

show forcelinkdown

Use this command to display the status of the force link down function.
show forcelinkdown
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of the force link down function:
Matrix(rw)->show forcelinkdown
ForceLinkDown feature is globally enabled
4-38 Matrix NSA Series Configuration Guide