Table of Contents
Advertisement
Purpose
To configure multiple authentication.
NOTE: In order for multiple authentication to function on the device, each possible
method of authentication (MAC authentication, PWA, 802.1X) must be enabled globally
and configured appropriately on the desired ports per its corresponding command set
as described in this chapter.
Multiple authentication mode must be globally enabled on the device using the set
multiauth mode command as described in
Commands
The commands used to configure multiple authentication are listed below and described in the
associated section as shown:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
14-134 Matrix NSA Series Configuration Guide
(Section
14.3.10.1)
(Section
14.3.10.2)
(Section
14.3.10.3)
(Section
14.3.10.4)
(Section
14.3.10.5)
(Section
14.3.10.6)
(Section
14.3.10.7)
(Section
14.3.10.8)
(Section
14.3.10.9)
(Section
14.3.10.10)
(Section
(Section
14.3.10.12)
(Section
14.3.10.13)
(Section
(Section
(Section
Section
14.3.10.11)
14.3.10.14)
14.3.10.15)
14.3.10.16)
14.3.10.1.
Advertisement
Chapters
Table of Contents
