Show Telnet - Enterasys N Standalone (NSA) Series Configuration Manual

2.2.7.1

show telnet

Use this command to display the status of Telnet on the device.
show telnet
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display Telnet status:
Matrix(rw)->show telnet
Telnet inbound is currently: ENABLED
Telnet outbound is currently: ENABLED
General Configuration Command Set
Starting and Configuring Telnet
Matrix NSA Series Configuration Guide 2-101