Show Port - Enterasys N Standalone (NSA) Series Configuration Manual

Port Configuration Command Set
Reviewing Port Status
4.3.2.1

show port

Use this command to display whether or not one or more ports are enabled for switching.
show port [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, operational status information for all ports will be
displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display operational status information for 1-Gigabit Ethernet port 14 in
3:
Matrix(rw)->show port ge.3.14
Port ge.3.14 enabled
4-24 Matrix NSA Series Configuration Guide
(Optional) Displays operational status for specific port(s).
For a detailed description of possible port-string values,
refer to Section 4.1.1.