Enterasys N Standalone (NSA) Series Configuration Manual page 186

Discovery Protocols Command Set
Cisco Discovery Protocol
Table 3-2 show ciscodp Output Details (Continued)
Output
Holdtime (TTL)
Device ID
Last Change
3-14 Matrix NSA Series Configuration Guide
What It Displays...
Number of seconds neighboring devices will hold PDU
transmissions from the sending device. Default value of 180
can be changed with the set ciscodp holdtime command as
described in Section
The MAC address of the switch.
The time that the last Cisco DP neighbor was discovered.
3.2.3.5.