Set Spantree - Enterasys Matrix E1 1G694-13 Configuration Manual

Table 5-1 show spantree stats Output Details (Continued)
Output
Cost
Priority
5.2.1.2

set spantree

Use this command to globally enable or disable the Spanning Tree algorithm on the switch.
set spantree {disable | enable}
NOTE: By default, Spanning Tree is enabled (globally and on all ports.) To display the
current status of Spanning Tree on the device or on one or more ports, use the show
spantree stats command as described in
Syntax Description
disable | enable
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to enable Spanning Tree on the device:
Matrix>set spantree enable
Spanning Tree Algorithm enabled.
Reviewing and Setting Spanning Tree Bridge Parameters
What It Displays...
Cost value assigned to the port.
Port's Spanning Tree priority.
Section
Globally disables or enables Spanning Tree.
Matrix E1 Series (1G694-13) Configuration Guide
Spanning Tree Configuration
5.2.1.1.
5-7