Show Igmp Vlan - Enterasys N Standalone (NSA) Series Configuration Manual

10.4.2.16 show igmp vlan

Use this command to display IGMP information for a specific VLAN.
show igmp vlan [vlan-list]
Syntax Description
vlan vlan-list
Command Defaults
None
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display igmp information for vlan 12:
Matrix(rw)->show igmp vlan 12
IGMP Vlan 12 Info
IGMP query state
QueryInterval(sec.)
Status
IGMP Version
Querier
QueryMaxResponseTime(sec.)
Robustness
LastMemberQueryIntvl(sec.)
QuerierUpTime
Router(s) on ports
Egressing ports
Show IGMP info for the given VLAN.
: Enabled
: 125
: Active
: 2
: 2.25.0.1
: 10
: 2
: 10
: 4 D
: none.
: lag.0.1-2,4
Matrix NSA Series Configuration Guide
IGMP Configuration Command Set
23 H 8 M
Configuring IGMP
10-25