Table of Contents
Advertisement
Table 13-1 RIP Configuration Task List and Commands (Continued)
To do this...
Specify a RIP version.
Configure RIP authentication.
Disable automatic route summarization
(necessary for enabling CIDR)
Disable triggered updates.
Disable or re-enable split horizon
poison-reverse.
Control the processing of routing updates.
Enable redistribution from non-RIP
routes.
Routing Protocol Configuration Command Set
Use these commands...
ip rip send version
(Section
ip rip receive version
key chain
(Section
13.2.2.9)
key
(Section
13.2.2.10)
key-string
(Section
accept-lifetime
(Section
send-lifetime
(Section
ip rip authentication keychain
ip rip authentication mode
no auto-summary
(Section
ip rip disable-triggered-updates
ip split-horizon poison
passive-interface
(Section
receive interface
(Section
distribute-list
(Section
redistribute
(Section
Matrix NSA Series Configuration Guide
Configuring RIP
13.2.2.7)
(Section
13.2.2.8)
13.2.2.11)
13.2.2.12)
13.2.2.13)
(Section
(Section
13.2.2.15)
13.2.2.16)
(Section
(Section
13.2.2.18)
13.2.2.19)
13.2.2.20)
13.2.2.21)
13.2.2.22)
13.2.2.14)
13.2.2.17)
13-3
Advertisement
Chapters
Table of Contents
