11.2.2.3
set history
Use this command to set the size of the history buffer.
set history size [default]
Syntax Description
size
default
Command Defaults
If default is not specified, the history setting will not be persistent.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the size of the command history buffer to 3 lines and make this the
default setting:
Matrix(rw)->set history 3 default
Logging And Network Management Command Set
Specifies the size of the history buffer in lines. Valid values
are 1 to 100.
(Optional) Makes this setting persist for all future sessions.
Matrix NSA Series Configuration Guide
Monitoring Network Events and Status
11-29